Arduino development boards are an open-source electronics platform based on easy-to-use hardware and software. Arduino boards are able to read inputs – light on a sensor, a finger on a button, or a Twitter message – and turn it into an output – activating a motor, turning on an LED, publishing something online. You can tell your board what to do by sending a set of instructions to the microcontroller on the board. To do so you use the Arduino programming language (based on Wiring), and the Arduino Software (IDE), based on Processing.
-
- Sale!
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
- ₹419.00 (inc. GST)
- Microcontroller: Atmega328P Operating Voltage: 5V Architecture: AVR Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory: 32 KB of which 2 KB used by the bootloader SRAM: 2 KB EEPROM: 1…
- Add to cart
-
- Sale!
Arduino Nano Board R3 with CH340 chip (Unsoldered)
- ₹369.00 (inc. GST)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
- Add to cart
-
- Sale!
USB A to USB B Cable for Arduino UNO/MEGA (Normal Quality)
- ₹24.00 (inc. GST)
- Add to cart
-
- Out of StockSale!
Arduino Mega 2560 ATmega2560
- ₹1279.00 (inc. GST)
- Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
- Read more
-
-
- Out of StockSale!
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
- ₹1839.00 (inc. GST)
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (the HOLD function). Maximum Real-time Sampling Rate: 1Msps…
- Read more
-
-
- Sale!
Uno R3 CH340G ATmega328p Development Board Arduino DIP
- ₹599.00 (inc. GST)
- Microcontroller ATmega328 (DIP) Arduino compatible– Interface CH340 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6
- Add to cart
-
- Sale!
NANO IO Shield Expansion Board For Arduino Screw Terminals
- ₹169.00 (inc. GST)
- Compatible with Arduino NANO All digital and analog pins breakout Compact size; Leads all pins out, convenient for wiring and doing experiments.
- Add to cart
-
- Out of Stock
PICkit3 Debugger Programmer Emulator Controller Development Board
- ₹1369.00 (inc. GST)
- Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds Built-in over-voltage/short circuit monitor Low voltage to 5V (1.8-5V range) Diagnostic LEDs (power, active, status) Read/write program and data memory of microcontroller Erase of all memory types (EEPROM, ID, configuration and program) with verification Peripheral freeze at breakpoint
- Read more
-
-
- Sale!
ATTINY85 USB Development Board
- ₹289.00 (inc. GST)
- Supports Arduino IDE 6 GPIO pins in which 4 have ADC attached and 3 are PWM capable Input Voltage Range 6Vdc to 20Vdc Onboard 5V regulator Built-In Serial Wire Debugging port 8k Flash Memory Status and Power LEDs onboard.
- Add to cart