-
- Sale!
TTP223 Capacitive Touch Sensor Module
- ₹14.00 (inc. GST)
- Supports momentary or latching/toggle modes Supports Active High or Active Low output signal modes Dimensions: 15mm x 11mm Input Voltage: 2V-5.5V DC The response time max ~ 60mS in fast mode, ~220mS at low power mode @VDD=3V Sensitivity can adjust by the capacitance (0~50pF)
- Add to cart
-
TTP224 4-Channel Capacitive Touch Switch Module
- ₹69.00 (inc. GST)
- Onboard 4 key TTP224 capacitive touch induction IC. Onboard 4-way level indicator. Working voltage: 2.4 to 5.5 V. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
- Add to cart
-
HX711 Dual-Channel 24 Bit Precision A/D weight Pressure Sensor
- ₹65.00 (inc. GST)
- Output Sensitivity: 1.0 ± 0.1 mV / V. Two selectable differential input channels. On-chip active low noise PGA with the selectable gain of 32, 64 and 128. On-chip oscillator requiring no external component with optional external crystal. On-chip power-on-reset. Measurement Resolution: 24 bit.
- Add to cart
-
SW-18020P Vibration Sensor
- ₹9.00 (inc. GST)
- Vibration sensor: SW-18020P Can detect the vibration of the surrounding environment Max voltage: 12V Max current: 50mA
- Add to cart
-
- Sale!
HX710B AIR PRESSURE (0-40KPA) SENSOR MODULE
- ₹239.00 (inc. GST)
- Model: HX710B Data Output Rate:10 SPS / 80SPS Max. Operating Current (mA):1.5 IC Package:16 Pin SOP
- Add to cart
-
- Sale!
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module
- ₹49.00 (inc. GST)
- Operating Voltage: 1.71V to 3.6V – would typically be operated from 3.3V. Operating Temperature: -40 to +85 deg. Celsius (full accuracy between 0 and +65 deg. C). Peak current: 1.12mA. Operating Pressure: 300 hPa to 1100 hPa. Accuracy between 700 to 900hPa and 25 to 40 deg. C: ±0.12hPa and ±1.0m.
- Add to cart
-
- Sale!
BMP180 Digital Barometric Sensor Module compatible with Arduino
- ₹78.00 (inc. GST)
- The BMP180 Digital Barometric Sensor Module is 5V compliant - a 3.3V regulator and a i2c level shifter circuit is included so you can use this sensor safely with 5V logic and power. Voltage: 3 to 5VDC Pressure sensing range: 300-1100 hPa -40 to +85°C operational range, +-2°C temperature accuracy This board/chip uses I2C 7-bit address 0x77.
- Add to cart
-
YZC-133 Weighing Load Cell Sensor 10kg For Electronic Weighing Scale
- ₹219.00 (inc. GST)
- Model: YZC-133 Rated Output:1.0 ± 0.1mV / V Non Linear Output:± 0.03% F.S Impedance (Ω):1115±10% Ω
- Add to cart
-
1Kg Load cell – Electronic Weighing Scale Sensor
- ₹219.00 (inc. GST)
- Capacity: 1KG Rated output(MV/V): 2.0±0.15 Accuracy class: C2 Maximum number of laod cell verification intervals(N max): 2000 Combined error(%RO): <±0.030 Creep(%RO/30min): 0.03 Temperature effect on sensitivity(%RO/°C): 0.0016 Temperature effect on zero(%RO/°C): 0.003 Zero balance(%RO): 1.0 Input resistance(O): 402±6 Output resistance(O): 350±3 Insulation resistance(MO<50V>): 5000 Operating temperature range(°C): -35~+80 Safe overload(%RO): 150 Ultimate overload(%RO): 200 Load cell material: Aluminium
- Add to cart
-
Reed Switch Sensor Module for Arduino
- ₹64.00 (inc. GST)
- Working voltage 3.3V-5 Output format: digital switching output (0 and 1)A fixed bolt holes for easy installation
- Add to cart
-
50kg Half-bridge Experiments Body Scale Load Cell Sensor
- ₹59.00 (inc. GST)
- Capacity (Kg): 50. Output Sensitivity (mv/v): 1.0±0.1. Nonlinearity (%FS): 0.03. Repeatability (%FS): 0.03. Input Resistance (Ω): 1000. Insulation Resistance (MΩ): ≥5000.
- Add to cart
-
KY-002 Vibration Switch Module
- ₹55.00 (inc. GST)
- Add to cart
-
Weighing Load Cell Sensor 5kg YZC-131 With Wires
- ₹219.00 (inc. GST)
- Model: YZC-131A Dimensions: 75 x 13 x 13 mm (L x W x H) Range: 5 kg Cable Length: 18 cm Fitting ScrewHole Size: M3 Rated output: 1.0 0.1mV / V Nonlinear: 0.05% F.S Hysteresis: 0.0% F.S Repeatability: 0.05% F.S
- Add to cart
-
TTP229 16-Way Capacitive Touch Switch Digital keypad Module
- ₹149.00 (inc. GST)
- Working voltage: 2.4V to 5.5V Built-in regulator Two modes Simple 8 key mode with independent 8 Channel parallel output. Advanced 16 Key modes with I2C interface output. Modes can be selected and configured by the user. Adjustable sensitivity
- Add to cart
-
TTP226 8-way Capacitive Touch Switch Module
- ₹119.00 (inc. GST)
- Onboard 8 key TTP226 capacitive touch induction IC. Onboard 8-way level indicator. Working voltage: 2.4 to 5.5 V. Modules, you can set the output mode, key output mode, the longest time and fast/low power output
- Add to cart
