-
- Sale!
Arduino UNO R3 Development Board – Clone Model- ATmega328P
- ₹679.00 (inc. GST)
- Microcontroller Chip – ATmega328P Operating Voltage – 5 V Input Voltage (Recommended) – 7-12V Analog I/O Pins – 6 Digital I/O Pins – 14 (of which 6 provide PWM output) PWM Digital I/O Pins – 6 Clock Speed – 16 MHz Flash Memory – 32 KB (ATmega328P) of which 0.5 KB used by bootloader SRAM – 2 KB (ATmega328P) EEPROM –…
- Add to cart
-
- Sale!
Uno R3 CH340G ATmega328p Development Board Arduino
- ₹389.00 (inc. GST)
- Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6
- Add to cart
-
- Sale!
L293D Motor Driver/Servo Shield for Arduino
- ₹149.00 (inc. GST)
- 1. Can drive 4 DC motors or 2 stepper motors or 2 Servos 2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter 2. Up to 4 bi-directional DC motors with individual 8-bit speed selection 4. Up to 2 stepper motors with single coil, double coil or interleaved stepping. 5. 4 H-Bridges: per bridge provides 0.6A…
- Add to cart
-
- Sale!
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
- ₹489.00 (inc. GST)
- Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min.
- Add to cart
-
USB to micro-USB Cable for NodeMCU/ARDUINO DUE/LEONARDO/PRO MICRO
- ₹39.00 (inc. GST)
- USB 2.0 Male A to Mini B 5-pin cable Allows you to transfer images and data between your cell phone, MP3,PDA, GPS systems to computer Up to 480 Mbps data transfer rate Hot-swappable cable Cable Total Length: 30 cm Weight: 50 gm
- Add to cart
-
NodeMcu ESP8266 V3 Lua CH340 Wifi Dev. Board
- ₹245.00 (inc. GST)
- Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Also known as Development Board, NodeMcu, NodeMcu ESP8266, ESP8266, Wifi, Wifi Board, 802.11n, 2.4GHz, ESP-12, ESP8266 series Flash size: 4MByte Lowest cost WI-FI
- Add to cart
-
- Sale!
Arduino Nano Board R3 with CH340 chip (soldered pin)
- ₹379.00 (inc. GST)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
- Add to cart
-
NodeMCU CP2102 Board ESP8266
- ₹299.00 (inc. GST)
- NodeMCU CP2102 The NodeMCU (Node MicroController Unit) is an open-source software and hardware development environment built around an inexpensive System-on-a-Chip (SoC) called the ESP8266 Operating Voltage 5V Flash Memory 4Mb Processor speed 80-160MHz RAM 32K + 80K GPIOs 16 ADC 1, 10-bit
- Add to cart
-
- Sale!
Cable for Arduino UNO/MEGA (USB A to B) 30CM
- ₹33.00 (inc. GST)
- Cable for Arduino UNO/MEGA (USB A to B)-30CM
- Add to cart
-
- Sale!
3 in 1 Aluminum Heat Sink Set for Raspberry Pi 3
- ₹29.00 (inc. GST)
- Light weight aluminum heat sinks with adhesive backing strip to stick firm. A set of 3 heat sinks. Exclusively made for Raspberry Pi. Thermal transfer self-adhesive. Reduce the risk of damage due to overclocking.
- Add to cart
-
- Out of Stock
Cable For Arduino UNO/MEGA (USB A to B)-50 cm
- ₹35.00 (inc. GST)
- Type: Type-A to Type-B Weight: 25-30 gm. Color: Blue Length: 50 cm. Fully compatible with any device which has female A type port.
- Read more
-
-
- Sale!
Nano Board R3 CH340 chip With USB Mini Cable compatible with Arduino (soldered)
- ₹419.00 (inc. GST)
- Microcontroller: Atmega328P Operating Voltage: 5V Architecture: AVR Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory: 32 KB of which 2 KB used by the bootloader SRAM: 2 KB EEPROM: 1…
- Add to cart
-
- Sale!
Arduino Nano Board R3 with CH340 chip (Unsoldered)
- ₹369.00 (inc. GST)
- The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
- Add to cart
-
- Sale!
USB A to USB B Cable for Arduino UNO/MEGA (Normal Quality)
- ₹24.00 (inc. GST)
- Add to cart
-
ESP-01 ESP8266 Serial WIFI Wireless Transceiver Module
- ₹129.00 (inc. GST)
- 802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3)
- Add to cart
-
Transparent Acrylic Case For Arduino Uno R3
- ₹64.00 (inc. GST)
- Material: Acrylic sheet For Arduino UNO R3 Development Board only. With screw copper pillar and installation instructions. To protect your little computer against damages, dust, and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly. Simply Clicks Together Enclosure. Length: 80mm Width: 65mm Height: 21mm Weight: 42gm
- Add to cart
-
Pro Mini ATMEGA328P 3.3V/8M
- ₹549.00 (inc. GST)
- Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. Package Includes : 1 x Pro mini 5v/16mHZ compatible with…
- Add to cart
-
- Sale!
5MP Raspberry Pi 3/4 Model B Camera Module Rev 1.3 with Cable (Raspberry Pi Camera)
- ₹299.00 (inc. GST)
- Resolution: 5 MP Interface Type: CSI(Camera Serial Interface) Dimensions: 25x23x8 (LxWxH) mm Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video Fully Compatible with Raspberry Pi 3 and 4 Model B Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
- Add to cart
-
D1 Mini V2 NodeMcu 4M Bytes Lua WIFI Internet Of Things Development Board Based ESP8266
- ₹259.00 (inc. GST)
- Microcontroller: ESP-8266EX Operating Voltage: 3.3V Analog Input Pin voltage: 3.2V max On-Board Power Supply Switch Output: 5V Board Size: 34.2mm x 25.6mm Weight: 10-15g
- Add to cart
-
- Out of StockSale!
Arduino Mega 2560 ATmega2560
- ₹1279.00 (inc. GST)
- Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
- Read more
-
