-
- Out of StockSale!
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
- ₹1839.00 (inc. GST)
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (the HOLD function). Maximum Real-time Sampling Rate: 1Msps…
- Read more
-
-
- Out of Stock
Raspberry Pi 4 Model-B with 8 GB RAM
- ₹12390.00 (inc. GST)
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power [email protected] via USB Type-C port Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
- Read more
-
-
CH340G USB To TTL(Serial) Converter For Arduino Nano Raspberry Pi
- ₹89.00 (inc. GST)
- Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
- Add to cart
-
- Out of Stock
Raspberry Pi 4 Model-B with 4 GB RAM
- ₹9999.00 (inc. GST)
- 4GB Variants Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power [email protected] via USB Type-C port Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
- Read more
-
-
ST-Link V2 Mini STM8 STM32 Simulator Download Programmer
- ₹389.00 (inc. GST)
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal resettable fuse, complete protection of your expensive computer motherboard!…
- Add to cart
-
- Sale!
Aluminum Stripe Grooved Case for Raspberry Pi 4, Inner Heatsink Pillars
- ₹649.00 (inc. GST)
- 1. The case made of aluminum alloy, durable, metallic luster, not easy to rust, and can be well protected to your Pi 4B. 2. The Aluminum case retains GPIO, A / V, USB, Ethernet, HMDI, SD card slot, camera slot, all ports and slots The case can play with Raspberry Pi 4 Model B perfectly. 3. There is no need…
- Add to cart
-
- Out of Stock
Raspberry Pi Zero 2 W Development Board
- ₹2399.00 (inc. GST)
- BCM2710A1 die Cortex-A53 CPU 512MB LPDDR2 DRAM 802.11b/g/n wireless LAN Bluetooth 4.2 / Bluetooth Low Energy (BLE) MicroSD card slot Mini HDMI and USB 2.0 OTG ports Micro USB power
- Read more
-
-
- Out of Stock
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
- ₹689.00 (inc. GST)
- Logical light indication: a small light indicate CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc automatically Great for MCU, ARM system and FPGA development Voltage: 0-5.5V
- Read more
-
-
- Sale!
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
- ₹259.00 (inc. GST)
- Compatible With Raspberry Pi3B/3B+ Can Provide Output Current Up-to 6A I2C Battery Monitoring Built-in Battery Charger
- Add to cart
-
Raspberry Pi 4 Black Compact ABS Case
- ₹179.00 (inc. GST)
- Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
- Add to cart
-
Official Raspberry PI Zero/Zero W Case
- ₹239.00 (inc. GST)
- The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W and Raspberry pi Zero 2W. The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid, and a Camera Lid.
- Add to cart
-
DS3231 Real Time Clock Module 3.3V 5V Precise, with battery
- ₹239.00 (inc. GST)
- Supply voltage(V):+2.3 to +5.5 operating temperature range:-40°C to +85°C Supported Raspberry Pi and Arduino Provide battery backup for continuous timing. Two calendar alarm. 1Hz and 32.768kHz output.
- Add to cart
-
CH341A 24 25 Series EEPROM Flash BIOS USB Programmer
- ₹279.00 (inc. GST)
- USB interface With CH341A chip Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip With 24/25 status indicator lamp Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip Recognize 25 series chip automatically Supports download STC series procedure of single chip SPI pin to support expanding the utility STC microcontroller supports a full range…
- Add to cart
-
Raspberry Pi 4 Transparent Compact ABS Case with Cooling FAN Slot
- ₹179.00 (inc. GST)
- Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
- Add to cart
-
- Sale!
Official USB type-C 15.3W Power Supply For Raspberry Pi 4-Black
- ₹729.00 (inc. GST)
- Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi
- Add to cart
-
- Sale!
Raspberry Pi 4B Official Case
- ₹349.00 (inc. GST)
- Easy two-piece installation design Hole for mounting the pi inside the case Rubber pad grip at the bottom Precise access to all port and status LEDs with Symbols Raspberry LOGO on Top
- Add to cart