-
- Sale!
SC8UU 8mm Linear Motion Ball Bearing Slide Block
- ₹149.00 (inc. GST)
- Product Name: Linear Bearing Model: SC8UU Material: Metal, Rubber ID: 8mm.
- Add to cart
-
- Out of Stock
12V DC 3D Printer 5015 Vortex Turbo Cooling Fan
- ₹109.00 (inc. GST)
- 50mm Radial Cooling fan. 12V 2-point Pin DC 0.13A. Made of high-quality PBT 30% glass line VO Bearing is a high precision, long life, and low noise. Excellent for cooling heat sinks on hot ends, prints, or other cooling needs
- Read more
-
-
- Sale!
Aluminum Flexible Coupling Coupler Helical Shaft 5mm x 8mm
- ₹129.00 (inc. GST)
- Material: Aluminium. Bore Diameter d1: 5 MM. Bore Diameter d2: 8 MM. Torsional stiffness: Zero backlash One piece construction
- Add to cart
-
17HS4401S Stepper Motor Black Color Hybrid 4.2KGCM 1.5A with 1M Long Cable
- ₹699.00 (inc. GST)
- The 17HS4401S Stepper Motor is a Black Hybrid Stepper Motor with 4.2KGCM Torque and a Current of 1.5A with 1M Long Cable. This is best suited for 3D Printer ,Laser Engraver and other Projects
- Add to cart
-
Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
- ₹65.00 (inc. GST)
- Temperature range of use: −40°C to 270°C. Dissipation power factor: ≥5 mW/℃ (static in the air). 100k Ohm NTC Thermistor. NTC Thin Film Thermistor Cable. Max power rating: 45 mW The hot time constant: ≤7 s(in the air) Thermistor 100k NTC with 1 Meter Cable Temperature Sensor
- Add to cart
-
CNC shield V3 for Engraving Machine 3D Printer A4988 DRV8825 driver expansion board
- ₹149.00 (inc. GST)
- CNC Shield Version 3.0 for arduino GRBL compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th…
- Add to cart
-
- Sale!
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- ₹549.00 (inc. GST)
- H bridge bipolar constant current drive. The biggest 4.0 A Eight kinds of output current are optional. The biggest 32 To subdivide 6 kinds of subdivision modes selectable. Input signal high-speed photoelectric isolation. A total of standard single pulse interface. Offline retention function. The semi-enclosed casing can adapt to a more stringent environment. Provide energy saving half automatic current lock…
- Add to cart
-
- Sale!
8mm Bore Inner Ball Mounted Pillow Block Insert Bearing KP08
- ₹159.00 (inc. GST)
- Type: KP08 Material: zinc alloy Bore Diameter:8mm Mounting Hole Diameter: 5 mm Durable with high precision Can withstand great weight
- Add to cart
-
- Out of StockSale!
E3D v6 All Metal J-Head Hotend Extruder 1.75mm Filament 0.4mm Nozzle
- ₹699.00 (inc. GST)
- Specification: brass material extruder nozzles, output diameter 0.3mm/ 0.4mm/ 0.5mm, input diameter (filament) 1.75mm . Package include: all metal V6 hotend 12v / 40w / 1.75mm / 0.4mm extruder full kit (V6 printhead + fan + fan cover + PTFE tube + pipe fitting), 1 pieces brass extrusion nozzles (1x0.4mm ) and a v6 heating block, a 2-part Teflon tube…
- Read more
-
-
TB6560 Stepper Motor Driver
- ₹589.00 (inc. GST)
- Working voltage:DC 10V-35V. Recommended to use a switching power supply DC24V Rated maximum output: ± 3A, peak 3.5A. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable…
- Add to cart
-
DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink
- ₹199.00 (inc. GST)
- Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm.
- Add to cart
-
Aluminum Flexible Shaft Coupling 5mm x 5mm
- ₹119.00 (inc. GST)
- Material: Aluminium. Bore Diameter d1: 5 mm. Bore Diameter d2: 5 mm. Torsional stiffness: Zero backlash. One piece construction.
- Add to cart
-
CNC 3D Printer Mech Endstop Switch
- ₹89.00 (inc. GST)
- Wire type: 22AWG Working voltage: 300V Working Current: 2A Temperature resistance: 80° C Cable length: 70cm
- Add to cart
-
GT2 6mm Belt Width 20 Teeth 5mm Bore Timing Pulley
- ₹99.00 (inc. GST)
- Compatible with GT2 Belts of 6mm width Inner Bore Diameter: 5mm Weight: 14 gm Material: Aluminum No. of teeth: 20 Tooth pitch: 2mm Flange: double Setscrews available for mounting GT2 gear to motor shaft/axle
- Add to cart
-
SK8 8MM linear bearing rail support XYZ Shaft Table CNC Router SH8A – 2Pcs
- ₹139.00 (inc. GST)
- Model description: SK8 Shaft ID: 8mm Dimensions: 14 x 42 x 32 (LxWxH) mm Mounting Hole Diameter: Approx. 5.5 mm Center Hole Distance: Approx. 32 mm
- Add to cart
-
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- ₹349.00 (inc. GST)
- Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
- Add to cart
