- Out of StockSale!
Arduino Mega 2560 ATmega2560
- Development Boards, Arduino Boards and Accessories
- ₹1279.00 (inc. GST)
- Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
- Read more
GT2 Timing Pulley 20 Teeth 5mm Bore for 6 mm Belt
- Basic Components
- ₹55.00 (inc. GST)
- Material: Aluminum No. of teeth: 20 Pitch: 2 mm Inner Diameter: 5mm Compatible Belt width: 6mm Weight: 6 gm
- Add to cart
12V DC input to 24-0-24V 5A DC output step up or boost convertor circuit board
- Audio and Video, Amplifiers and Sound Cards
- ₹399.00 (inc. GST)
- Step up or power boost converter Input voltage: 12V DC Output voltage: 24-0-24V DC Output current: 5A Frequency : 40HZ/60HZ Inbuilt over voltage, over current, and short circuit protection Simple and easy-to-use design Fast transient response
- Add to cart
- Out of StockSale!
DSO138 2.4″ TFT Handheld Pocket-size Digital Oscilloscope Kit DIY Parts Electronic Learning Set Soldered
- Development Boards, Arduino Boards and Accessories, ESP Boards and Accessories, Raspberry Boards and Accessories, Tools, Tools and Accessories
- ₹1839.00 (inc. GST)
- This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (the HOLD function). Maximum Real-time Sampling Rate: 1Msps…
- Read more
- Sale!
CN3791 9V MPPT Solar Charger Module
- Batteries and Accessories, Batteries BMS and Accessories, Miscellaneous Module, Modules, Sensor and Modules
- ₹339.00 (inc. GST)
- Input voltage: select the corresponding module according to the nominal voltage of the solar panel (9V) Output voltage: nominal 3.7V full charge voltage 4.2V lithium battery Interface: 2-pin JST connectors (or PH2.0) Max Charging current: 2A PWM switching frequency: 300KHz Charging voltage: 4.2V ± 1% Working environment temperature: -40 ° C to +85 ° C
- Add to cart
Tilt Switch Sensor Module For Arduino
- Sensor and Modules, Miscellaneous Module, Modules
- ₹39.00 (inc. GST)
- Operating Voltage: 5v DC. This module is Small and Simple to use. Digital switch output (0 & 1) High sensitivity Completes the circuit when the module is tilted LED lights up when tilt switch is activated
- Add to cart
- Sale!
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- 3D Printer Parts, Motors and Drivers
- ₹549.00 (inc. GST)
- H bridge bipolar constant current drive. The biggest 4.0 A Eight kinds of output current are optional. The biggest 32 To subdivide 6 kinds of subdivision modes selectable. Input signal high-speed photoelectric isolation. A total of standard single pulse interface. Offline retention function. The semi-enclosed casing can adapt to a more stringent environment. Provide energy saving half automatic current lock…
- Add to cart
ESP-12E: ESP8266 Serial Port WIFI Wireless Transceiver Module For Arduino
- ESP Boards and Accessories, Development Boards
- ₹149.00 (inc. GST)
- WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units
- Add to cart
- Sale!
NANO IO Shield Expansion Board For Arduino Screw Terminals
- Arduino Boards and Accessories, Development Boards, IC's and Base
- ₹169.00 (inc. GST)
- Compatible with Arduino NANO All digital and analog pins breakout Compact size; Leads all pins out, convenient for wiring and doing experiments.
- Add to cart
- Out of Stock
Three-Way Soil Meter For Moisture, Light Intensity and pH Testing Meter
- Sensors, Temp, Humidity & Gas Sensor
- ₹349.00 (inc. GST)
- Three different soil test meters in one device; Measures moisture, pH/Acidity, and light. 100% Accuracy; Easy to read moisture, pH and light levels; Perfect monitor for growing healthy plants. Takes the guesswork out of gardening; Know exactly when to water, amend your soil or adjust lighting. Compact, portable & easy to use, just plug and use; Compact soil meter works…
- Read more
- Sale!
CJMCU MCP4725 I2C DAC Breakout Development Board
- Sensor and Modules, Development Boards, Modules
- ₹209.00 (inc. GST)
- 12-bit resolution Small package 2.7V to 5.5V supply Internal EEPROM to store settings I2C Interface (Standard, Fast, and High-Speed supported)
- Add to cart
TM1637 4 Bits Digital Tube LED Display Module With Clock Display for Arduino
- Sensor and Modules, Audio and Video, Buzzer and Speakers, Miscellaneous Module, Modules
- ₹75.00 (inc. GST)
- Driver Chip: MAX7219 Input Voltage: 3.7 to 5.3 V Input Current: 30 mA Display Dimensions: 42x24x12 (LxWxH) mm
- Add to cart
- Out of Stock
5amp PWM DC Motor Speed Controller
- Basic Components
- ₹189.00 (inc. GST)
- Operating voltage: DC3V-35V Output current: 0-5A Output power: 90W (max) PWM cycle: 1% -100% PWM frequency: 10khz Size: 30mm x 24mm x 15mm (Without Handle)
- Read more
- Sale!
Core Board STM8S103F3P6 STM8 Development Board Minimum System Board
- Development Boards, Arduino Boards and Accessories
- ₹149.00 (inc. GST)
- based on STM32F103C8T6 Chip On board reset button On board Micro USB port for power input voltage 4.5V-15V. Power light indicator light Support SWIM debug mode.
- Add to cart
Shop
This is where you can browse products in this store.