₹645.00Original price was: ₹645.00.₹279.00Current price is: ₹279.00. (inc. GST)
Microcontroller ATmega328 (SMD) Arduino compatible– Interface CH340G Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6
₹245.00Original price was: ₹245.00.₹189.00Current price is: ₹189.00. (inc. GST)
Power input: 4.5V ~ 9V (10VMAX), USB-powered Transfer rate: 110-460800bps Support UART / GPIO data communication interface Support Smart Link Smart Networking Working temperature: -40°C ~ + 125°C Drive Type: Dual high-power H-bridge Don’t need to download resetting A great set of tools to develop ESP8266 Also known as Development Board, NodeMcu, NodeMcu ESP8266, ESP8266, Wifi, Wifi Board, 802.11n, 2.4GHz, ESP-12, ESP8266 series Flash size: 4MByte Lowest cost WI-FI
₹399.00Original price was: ₹399.00.₹299.00Current price is: ₹299.00. (inc. GST)
Original FT232RL main control chip, fast speed and good stability. 2. Support Windows XP/WIN7/WIN8/WIN10 32/64-bit system. 3. Stable speed up to 3Mbps (3 times 921600).
₹449.00Original price was: ₹449.00.₹319.00Current price is: ₹319.00. (inc. GST)
100% Brand new and high-quality STM32 Board 84 MHz work frequency. 256K flash memory,64K SRAM. 1.7-3.6V power, I/O. 4-26MHz crystal. Onboard the Type-C USB interface, you can give the board power supply and USB communication.
₹39.00Original price was: ₹39.00.₹29.00Current price is: ₹29.00. (inc. GST)
USB 2.0 Male A to Mini B 5-pin cable Allows you to transfer images and data between your cell phone, MP3,PDA, GPS systems to computer Up to 480 Mbps data transfer rate Hot-swappable cable Cable Total Length: 30 cm Weight: 50 gm
₹39.00Original price was: ₹39.00.₹29.00Current price is: ₹29.00. (inc. GST)
Light weight aluminum heat sinks with adhesive backing strip to stick firm. A set of 3 heat sinks. Exclusively made for Raspberry Pi. Thermal transfer self-adhesive. Reduce the risk of damage due to overclocking.
₹165.00Original price was: ₹165.00.₹149.00Current price is: ₹149.00. (inc. GST)
1. Can drive 4 DC motors or 2 stepper motors or 2 Servos 2. 2 interface for 5V Servo connected to the high-resolution dedicated timer no jitter 2. Up to 4 bi-directional DC motors with individual 8-bit speed selection 4. Up to 2 stepper motors with single coil, double coil or interleaved stepping. 5. 4 H-Bridges: per bridge provides 0.6A…
₹510.00Original price was: ₹510.00.₹249.00Current price is: ₹249.00. (inc. GST)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
₹369.00Original price was: ₹369.00.₹329.00Current price is: ₹329.00. (inc. GST)
WiFi Bluetooth ultra-low power consumption dual core. Average operating current: 80 mA Bluetooth: v4.2 BR/EDR and BLE Ultra-low-power management. 4 MB Flash. 30 Pin module. Supply Voltage: 3.0 V ~ 3.6 V. Data Rate: 150 Mbps. Frequency: 2.4 GHz
₹699.00Original price was: ₹699.00.₹489.00Current price is: ₹489.00. (inc. GST)
Flash LED off: 180mA @ 5V. Flash LED on to maximum brightness: 310mA @ 5V. Deep-sleep: 6mA @ 5V min. Modem-sleep: 20mA @ 5V min. Light-sleep: 6.7mA @ 5V min.
₹299.00Original price was: ₹299.00.₹289.00Current price is: ₹289.00. (inc. GST)
NodeMCU CP2102 The NodeMCU (Node MicroController Unit) is an open-source software and hardware development environment built around an inexpensive System-on-a-Chip (SoC) called the ESP8266 Operating Voltage 5V Flash Memory 4Mb Processor speed 80-160MHz RAM 32K + 80K GPIOs 16 ADC 1, 10-bit
₹419.00Original price was: ₹419.00.₹348.00Current price is: ₹348.00. (inc. GST)
Communication distance: 15KM Sensitivity: down to -148dBm Programmable bit rates: up to 300kbps RSSI dynamic range: 127dB Wireless frequency: 433MHz Working voltage: 1.8-3.7v Working temperature: -40-+80 ℃
₹855.00Original price was: ₹855.00.₹649.00Current price is: ₹649.00. (inc. GST)
Micro-controller : ATmega328. Operating Voltage : 5V. Input Voltage (recommended) : 7-12V. Digital I/O Pins : 14 (of which 6 provide PWM output). Analog Input Pins : 6.
Material: Acrylic sheet For Arduino UNO R3 Development Board only. With screw copper pillar and installation instructions. To protect your little computer against damages, dust, and scratches Clear Top and Bottom. This case provides easy access to all ports. It requires no tools for easy assembly and disassembly. Simply Clicks Together Enclosure. Length: 80mm Width: 65mm Height: 21mm Weight: 42gm
Compatible with Arduino NANO All digital and analog pins breakout Compact size; External power supply current support Leads all pins out, convenient for wiring and doing experiments. Also known as Arduino Shield, Arduino Nano, Shield, Screw Shield, Expansion Board, Arduino NANO 328P Shield
₹599.00Original price was: ₹599.00.₹269.00Current price is: ₹269.00. (inc. GST)
Microcontroller: Atmega328P Operating Voltage: 5V Architecture: AVR Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 8 DC Current per I/O Pin 40 mA DC Current for 3.3V Pin 50 mA Flash Memory: 32 KB of which 2 KB used by the bootloader SRAM: 2 KB EEPROM: 1…
802.11 b/g/n Standards Wi-Fi Direct (P2P), soft-AP 1MB Flash Memory Integrated low power 32-bit CPU could be used as an application processor A-MPDU & A-MSDU aggregation & 0.4ms guard interval Wake up and transmit packets in < 2ms Standby power consumption of < 1.0mW (DTIM3)
USB Type: Type-A to Type-B Weight: 80 gm. Length: 3.11 feet (120 cm) Gold Plated Connector Fully compatible with the PC. Molded strain relief and PVC over molding to ensure a lifetime of error-free data transmissions.
₹952.00Original price was: ₹952.00.₹549.00Current price is: ₹549.00. (inc. GST)
Three modes: AP, STA, and AP+STA Support for Lua program, easy to develop 2.4 GHz dual-mode WiFi and Bluetooth Pre-integrated with antenna and RF balun
₹499.00Original price was: ₹499.00.₹299.00Current price is: ₹299.00. (inc. GST)
Resolution: 5 MP Interface Type: CSI(Camera Serial Interface) Dimensions: 25x23x8 (LxWxH) mm Supported Video Formats: 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 video Fully Compatible with Raspberry Pi 3 and 4 Model B Plug-n-Play camera for Raspberry Pi 3 and 4 Model B.
₹720.00Original price was: ₹720.00.₹599.00Current price is: ₹599.00. (inc. GST)
Microcontroller ATmega328 (DIP) Arduino compatible– Interface CH340 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 5-20V Digital I / O Pins 14 (of which 6 provide PWM output) Analog Input Pins: 6
₹899.00Original price was: ₹899.00.₹359.00Current price is: ₹359.00. (inc. GST)
The Arduino Nano Board R3 with CH340 is another popular Arduino development board very much similar to the Arduino UNO They use the same Processor (Atmega328p) and hence they both can share the same program.
₹699.00Original price was: ₹699.00.₹274.00Current price is: ₹274.00. (inc. GST)
Wifi protocol: 802.11 b/g/n STA/AP: work mode Integrated TCP/IP stack: support one socket Work as TCP/UDP Server or Client mode Serial port baud rate： 1200/2400/4800/9600/19200/38400/57600/74800/ 115200 bps
₹249.00Original price was: ₹249.00.₹189.00Current price is: ₹189.00. (inc. GST)
PIC16/18XX 40PIN Series devices (except 16F59) PIC16/18XX 28PIN Series devices (except 16F57) PIC16/18XX 18PIN Series devices The PIC 8PIN/14PIN/20PIN family of devices (except 10FXX)
₹389.00Original price was: ₹389.00.₹229.00Current price is: ₹229.00. (inc. GST)
PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable! Interface definition directly marked on the shell, clear, convenient and practical! 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V Shell characters using laser engraving, never fade off! Permanent clarity! 500MA internal resettable fuse, complete protection of your expensive computer motherboard!…
Full-speed USB support using Windows standard drivers Real-time execution Processors run at maximum speeds Built-in over-voltage/short circuit monitor Low voltage to 5V (1.8-5V range) Diagnostic LEDs (power, active, status) Read/write program and data memory of microcontroller Erase of all memory types (EEPROM, ID, configuration and program) with verification Peripheral freeze at breakpoint
₹119.00Original price was: ₹119.00.₹118.00Current price is: ₹118.00. (inc. GST)
Fully compliant USB 2.0 standard, backward compatible with USB1.1 Support System: Windows XP, Vista, Windows 7, Linux, MacOS, and WinCE5.0 drive Baud Rate Range: 75bps – 115200bps, up to 6Mbps Supports Plug, Play and hot-swap ( USB side) Better than using CH341D chip or similar chip to support the laptop USB port.
Built-in USB to TTL Transfer chip. Designed to be used for USB to TTL electronic projects. TTL interface output, easy to connect to your MCU. Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device. The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC Supports WIN7/VISTA/MAC/LINUX(32 bit /64-bit system)
₹115.00Original price was: ₹115.00.₹98.00Current price is: ₹98.00. (inc. GST)
Compatible with Arduino Reset button ICSP header Lots of GND and +5V rails DIP prototyping area to add more chips SOIC prototyping area above USB jack for up to 14-pin SOIC chip, narrow medium or wide package. Comes with ‘mini’ breadboard led indicator on top
₹390.00Original price was: ₹390.00.₹289.00Current price is: ₹289.00. (inc. GST)
Supports Arduino IDE 6 GPIO pins in which 4 have ADC attached and 3 are PWM capable Input Voltage Range 6Vdc to 20Vdc Onboard 5V regulator Built-In Serial Wire Debugging port 8k Flash Memory Status and Power LEDs onboard.
₹159.00Original price was: ₹159.00.₹109.00Current price is: ₹109.00. (inc. GST)
based on Chip: CH340G Supports all basic windows versions. The adapter plate integrated 1000μF solid capacitors to ensure the current supply The power supply will not be a problem to make WIFI module crashes unresponsive. Using 3225 SMD crystal oscillator, improve the stability of serial work, on a beautiful and tall. Working voltage: 4.5V – 5.5V (Onboard 3.3v LDO Regulator)…
₹399.00Original price was: ₹399.00.₹289.00Current price is: ₹289.00. (inc. GST)
Microcontroller: ATmega328P Circuit Operating Voltage: 5V Clock frequency: 16MHz. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. A pair of TTL level serial port transceiver : RX / TX.
₹279.00Original price was: ₹279.00.₹209.00Current price is: ₹209.00. (inc. GST)
USB interface With CH341A chip Support 24 EEPROM and 25 SPI flash 8pin or 16pin chip With 24/25 status indicator lamp Support USB to TTL conversionSupport 24EEPROM and 25 SPI flash 8pin/ 16pin chip Recognize 25 series chip automatically Supports download STC series procedure of single chip SPI pin to support expanding the utility STC microcontroller supports a full range…
₹185.00Original price was: ₹185.00.₹184.00Current price is: ₹184.00. (inc. GST)
The perfect solution for breaking out the pins from Lua V3 Nodemcu. Small and Handy module. The spacing between mounting headers is 25.5 mm.. Lead-out all the IO ports of the ESP-12E development board Lead out the pins of 5V and 3.3V power supply Convenient to connect with peripheral modules Onboard 5V / 1A DC-DC step-down converter circuit Onboard power…
Circuit Operating Voltage: 5V Clock frequency: 16MHz. Digital I/O Pins: 14 8 analog input port: A0 ~ A7. A pair of TTL level serial port transceiver : RX / TX. 6 PWM port: D3, D5, D6, D9, D10, D11. Use For Atmel Atmega328P-AU microcontroller. Support serial download. Support 9V battery. Package Includes : 1 x Pro mini 5v/16mHZ compatible with…
₹549.00Original price was: ₹549.00.₹309.00Current price is: ₹309.00. (inc. GST)
131 powerful instructions – Most Single Clock Cycle Execution 32 x 8 general purpose working registers Fully static operation Up to 20MIPS throughput at 20MHz On-chip 2-cycle multiplier Write/erase cycles: 10,000 flash/100,000 EEPROM Optional boot code section with independent lock bits In system programming by on-chip boot program True read while write operation Programming lock for software security Two 8-bit…
WS2812 Led on board. 802.11 b/g/n Wi-Fi Direct (P2P), soft-AP Integrated TCP/IP protocol stack Integrated TR switch, balun, LNA, power amplifier and matching network Integrated PLL, regulators, DCXO and power management units
Adopt imported controller PL2303HX, which can stabilize the flash with high speed 500mA self-recovery fuse for protection Two data transmission indicator can monitor data transfer status in real time Reserve 3.3V and 5V pin interface, easy for the DDWRT of different voltage system that needs power The entire board is coated by the high quality transparent heat-shrinkable sleeve, making the…
₹689.00Original price was: ₹689.00.₹549.00Current price is: ₹549.00. (inc. GST)
Logical light indication: a small light indicate CHO electrical level. Input feature: 5PF,100K Ohm. USB power supply; USB logic analyzer for monitoring, analyzing and debugging digital circuits 8-Channels USB logic analyzer with a 24Mhz sampling frequency Can analyze UART, IIC, and SPI, etc automatically Great for MCU, ARM system and FPGA development Voltage: 0-5.5V
₹1369.00Original price was: ₹1369.00.₹1279.00Current price is: ₹1279.00. (inc. GST)
Microcontroller: ATmega2560 Operating Voltage: 5V Input Voltage (recommended): 7-12V Input Voltage (limits): 6-20V Digital I/O Pins: 54 (of which 15 provide PWM output) Analog Input Pins: 16 DC Current per I/O Pin: 40 mA DC Current for 3.3V Pin: 50 mA Flash Memory: 256 KB of which 8 KB used by bootloader SRAM: 8 KB EEPROM: 4 KB Clock Speed:…
₹199.00Original price was: ₹199.00.₹149.00Current price is: ₹149.00. (inc. GST)
based on STM32F103C8T6 Chip On board reset button On board Micro USB port for power input voltage 4.5V-15V. Power light indicator light Support SWIM debug mode.
₹1999.00Original price was: ₹1999.00.₹1839.00Current price is: ₹1839.00. (inc. GST)
This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen. Adjustable vertical displacement, and with instructions. With automatic, regular and one-shot modes, easy to capture the moment waveform. Available rising or falling edge trigger. Observable previous trigger waveform (negative delay). Can freeze at any time waveform display (the HOLD function). Maximum Real-time Sampling Rate: 1Msps…
It features reserved land-pattern for the 3.3V regulator It has Pinouts on the top layer in black color. Compatible with Latest ESP-12F ESP8266 Wifi Module It includes a 10K pull-up resistor populated on PCB.
Provides a user-friendly interface that allows users to go through the menu, make selections etc. It consists of a 1602 white character blue backlight LCD. The keypad consists of 6 keys select, up, right, down, left and reset. To save the digital IO pins, the keypad interface only uses one ADC channel. The key value is read out through a…
RP2040 microcontroller chip designed by Raspberry Pi Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz 264KB of SRAM, and 2MB of onboard Flash memory 26 × multi-function GPIO pins 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels Onboard temperature sensor
CNC Shield Version 3.0 for arduino GRBL compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals) Jumpers to set the Micro-Stepping for the stepper drivers. (Some drivers like the DRV8825 can do up to 1/32 micro-stepping ) 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th…
Communication interface voltage: 3.3V Working current: 240mA(MAX) Serial port baud rate: 115200 (default), can be modified to other values by AT command Serial communication format: 8N1 Wireless Network Mode: station / softAP / SoftAP + station Wireless criteria: 802.11 b / g / n WIFI @ 2.4 GHz, support for WPA / WPA2 security mode +19.5dBm output power
₹699.00Original price was: ₹699.00.₹519.00Current price is: ₹519.00. (inc. GST)
Microcontroller: ATmega328P Operating Voltage: 2.7-5.5 V Digital I/O Pins: 14 PWM Channels: 6 Analog Input Channels: 6 DC Current per I/O Pin: 40 mA Board will run from 2V to 5V. The latest version of the LilyPad supports automatic reset for even easier programming. The back side of the LilyPad is now completely flat!
CPU frequency: 72 MHz Operating voltage: 2.0 to 3.6 V Operating temperature: -40 to +85 °C / -40 to +105 °C Debug mode– Serial wire debug (SWD) & JTAG interfaces Dedicated 32 kHz oscillator for RTC with calibration
₹399.00Original price was: ₹399.00.₹299.00Current price is: ₹299.00. (inc. GST)
USB Protocol: USB V2.0 Operating Frequency: 2.4GHz ISM band Modulation Mode: GFSK (Gaussian Frequency Shift Keying) Transmitting Power: ≤4dBm Sensitivity: ≤-84dBm at 0.1% BER It’s easy to use and completely encapsulated. You can set it as slave or master. You can use AT command set the baud rate.
The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W and Raspberry pi Zero 2W. The case consists of two parts. It has a standard base featuring a cut-out to allow access to the GPIO, and a choice of three lids i.e a Plain Lid, a GPIO Lid, and a Camera Lid.
Microcontroller CH340 Operating Voltage 5V Input Voltage (recommended) 7-12V Input Voltage (limits) 6-20V Digital I/O Pins 54 (of which 15 provide PWM output) Analog Input Pins 16 DC Current per I/O Pin 40 mA Dimensions : 111 x 54 x 12 (LxWxH) mm.
₹12390.00Original price was: ₹12390.00.₹7999.00Current price is: ₹7999.00. (inc. GST)
Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A via USB Type-C port Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
Stably support SignalTap II embedded logic analyzer function, no mistake while crawling data. Fully support all Altera products such as CPLD: MAX3000, MAX7000, MAX9000 and MAXII. FPGA: Stratix, StratixII, StratxIII, Cyclone, CycloneII, CycloneIII, ACEX1K, APEX20K and FLEX10K etc. Active serial configuration device: EPCS1, EPCS4, EPCS16, EPCS64 etc. Enhanced configuration devices: EPC1, EPC4. Supports 3 download mode: AS, PS and JTAG.
Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Slots to route GPIO and CSI ribbon cable Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
Only 3-piece ABS case with access to all Ports on pi 4 Compatible for All variants of the Raspberry pi 4 Model B Easy to assemble and highly durable material Cut-out for micro SC card at the bottom panel locking screw holes and anti-slip rubber feet at the back.
₹859.00Original price was: ₹859.00.₹649.00Current price is: ₹649.00. (inc. GST)
1. The case made of aluminum alloy, durable, metallic luster, not easy to rust, and can be well protected to your Pi 4B. 2. The Aluminum case retains GPIO, A / V, USB, Ethernet, HMDI, SD card slot, camera slot, all ports and slots The case can play with Raspberry Pi 4 Model B perfectly. 3. There is no need…
₹9999.00Original price was: ₹9999.00.₹6499.00Current price is: ₹6499.00. (inc. GST)
4GB Variants Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz) LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0) Operating Power 5V@3A via USB Type-C port Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
BCM2710A1 die Cortex-A53 CPU 512MB LPDDR2 DRAM 802.11b/g/n wireless LAN Bluetooth 4.2 / Bluetooth Low Energy (BLE) MicroSD card slot Mini HDMI and USB 2.0 OTG ports Micro USB power
Supply voltage(V):+2.3 to +5.5 operating temperature range:-40°C to +85°C Supported Raspberry Pi and Arduino Provide battery backup for continuous timing. Two calendar alarm. 1Hz and 32.768kHz output.
Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors,…
The shield can support being fully assembled with Arduino MEGA Support soldering components directly on this shield Support sticking the mini breadboards on this shield Reset button up top Mainboard aureate quadrate With SOP28 SMT components encapsulation
1GHz, single-core CPU 512MB RAM Mini HDMI and USB On-The-Go ports Micro USB power 11 b/g/n wireless LAN Bluetooth 4.1 Bluetooth Low Energy (BLE) HAT-compatible 40-pin header Composite video and reset headers CSI camera connector
₹239.00Original price was: ₹239.00.₹199.00Current price is: ₹199.00. (inc. GST)
Support CAN V2.0B technical standard, communication rate 1Mb / S. Module 5V DC power supply, SPI interface protocol control 0 to 8 bytes long data field. 8MHZ crystal oscillator 120Ω terminal resistance Use High-speed CAN transceiver TJA1050 Impedance matching, guaranteed drive capability, long-distance data transmission, prevent signal radiation The working current: typical 5mA, standby current 1 microamp. Except for the…
The smallest 802.11b/g/n Wi-Fi SOC module Up to 160MHz clock speed Built-in 10 bit high precision ADC UART baud rate up to 4Mbps Low power 32-bit CPU, can also serve as the application processor
ESP32-D0WD core Supports multiple external QSPI flash and SRAM chips 32Mbits 3.3V SPI flash 802.11 b/g/n (802.11n up to 150Mbps) Wi-Fi protocol Bluetooth v4.2 BR/EDR and BLE SD card, UART, SPI, SDIO, I2C, LED PWM, Motor PWM, I2S, and IR module interfaces Hall sensor
2-Axis joystick Bluetooth / Serial interface I2C interface nRF24L01 interface Nokia 5110 LCD interface Interface connector Power switch to switch between 3.3 and 5V
Baud rate: 300 – 9216000bps, automatically detecting the serial signal data rate Load capacity: support multipoint, each converter allows RS485 interface device to connect 32 Interface Protection: TVS tube protection, USB self-recovery protection Support Windows98/ME/2000/XP/WIN7/Vista, Linux, Mac It can be up to 32 devices on the bus.
Ultra-small size Support serial to WiFi Wireless transparent transmission Long distance transmission with ultra-low power Support outboard antenna Bearing high temperature to 125 ℃, compared to the 85℃ for ESP8266.
₹799.00Original price was: ₹799.00.₹729.00Current price is: ₹729.00. (inc. GST)
Good Quality material 96-230Vac operating input range 50,000 hours MTBF 6-month warranty. Input Current: 0.5A maximum Input Power consumption (no load): 0.075W maximum USB-C connection goes straight into your Raspberry Pi
₹499.00Original price was: ₹499.00.₹349.00Current price is: ₹349.00. (inc. GST)
Easy two-piece installation design Hole for mounting the pi inside the case Rubber pad grip at the bottom Precise access to all port and status LEDs with Symbols Raspberry LOGO on Top
