Show sidebar
Show 9 12 18 24
Clear filters
-44%
This is 3S 12V 25A 18650 Lithium Battery Protection Board 11.1V 12.6V High Current With Balanced Circuit Over Charge Over-Discharge Over Current And Short Circuit Protection Function. Board charging and discharging are the same port, the board includes the balanced circuit. When the charge balance, the board will be a bit warm, even after disconnecting the charger, some are still in the balance, will continue to warm for a while until below the equilibrium break threshold. The protection board cannot be used for iron lithium polymer battery (for other batteries, no matter what material, as long as the overvoltage and put voltage can be used for cutting), electric finish machinery, electric bicycle batteries, car, and motorcycle starter battery protection. Applicable to the following products (within rated power): Electric drill, 775 motors (6A-10A), small power inverter, small power vacuum massager battery, LED lamp, 12V standby power electronic products, 12V120W car washing pump, battery, solar street lamp monitoring standby power supply, and other products. Rated current can’t over 25A, it can’t exceed 50A per 0.5 seconds. Specifications : Overcharge voltage range: 4.25-4.35v + 0.05v. Overdischarge voltage range: 2.3-2.7v + 0.05v. Operating current: 0 – 25A. Operating temperature: -40 – +50℃. Instantaneous current: 35 – 40A. Storage condition: -40 – +80℃. Quiescent current: less than 30uA. Balance current: about 40 – 50mA. Effective life: more than 30000 hours. Internal resistance: less than 100m ohm. Short-circuit protection: protection, delayed self recovery. Package includes: 1 x 3S 12V 18650 lithium battery protection board.
Add to compare
Quick view
Add to wishlist

3S 12V 25A 18650 Lithium Battery Protection Board

,

In stock

Original price was: ₹189.00.Current price is: ₹105.00. (inc. GST)
Add to cart
Tower Pro SG5010 is a high quality but really low-cost servo for all your mechatronic needs. It comes with a 3-pin power and control cable, even a dozen of hardware as shown
Add to compare
Quick view
Add to wishlist

Standard Servo-TowerPro SG-5010(180 Rotation)

,

In stock

₹279.00 (inc. GST)
Add to cart
-42%
USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool
Add to compare
Quick view
Add to wishlist

USB Logic Analyze 24M 8CH, MCU ARM FPGA DSP Debug Tool

, , ,

In stock

Original price was: ₹689.00.Current price is: ₹399.00. (inc. GST)
Add to cart
TTP229 16-Way Capacitive Touch Switch Digital Touch Sensor keypad
Add to compare
Quick view
Add to wishlist

TTP229 16-Way Capacitive Touch Switch Digital keypad Module

,

In stock

₹149.00 (inc. GST)
Add to cart
4 Way Digital Touch Capacitive Sensor Switch Module
4-Way-Digital-Touch-Capacitive-Sensor-Switch-Modul
Add to compare
Quick view
Add to wishlist

TTP224 4-Channel Capacitive Touch Switch Module

, ,

In stock

₹69.00 (inc. GST)
Add to cart
TTP226 8-way Capacitive Touch Switch Module.jpg
Add to compare
Quick view
Add to wishlist

TTP226 8-way Capacitive Touch Switch Module

, , , ,

In stock

₹119.00 (inc. GST)
Add to cart
Heat Sink compound is the most neglected component in high power electronics equipment. It is always required where mechanical heatsink fixation is required. Heatsink compound or Thermal Paste or Grease is a simple thing that fills up the open area spaces between the heated object and the heatsink. A proper Heat Sink compound transfers heat successfully without losing any thermal conductivity and cools down the targeted device.
Add to compare
Quick view
Add to wishlist

10gm White Thermal Heat Sink Compound/Paste/Grease for CPU Fan and thermal paste compounds

, ,

In stock

₹24.00 (inc. GST)
Add to cart
The soft body material of these screwdrivers offer you a comfortable grip. Manufactured by using quality assured material and advanced techniques, which make them up to the standard in this highly challenging field. Clip for safe carrying in pocket. Green color Handle
Add to compare
Quick view
Add to wishlist

Electric line Tester

In stock

₹21.00 (inc. GST)
Add to cart
-56%Hot
DMEGC INR18650-26E
DMEGC INR18650-26E
Add to compare
Quick view
Add to wishlist

High Quality DMEGC INR18650-26E 3.7V 2600mAh Li-Ion Battery (3C Rated EV Grade)

,

In stock

Original price was: ₹245.00.Current price is: ₹109.00. (inc. GST)
Add to cart
40 PIN DIP IC socket
Add to compare
Quick view
Add to wishlist

40 Pin DIP IC Socket Base Adaptor

In stock

₹7.80 (inc. GST)
Add to cart
LDR Photoresistor (Photo Cell) Light Dependent Resistor
LDR Photoresistor (Photo Cell) Light Dependent Resistor
Add to compare
Quick view
Add to wishlist

LDR Photoresistor (Photo Cell) Light Dependent Resistor 5mm

, ,

In stock

₹7.00 (inc. GST)
Add to cart
-7%
Single-Degit-7-Segment
Add to compare
Quick view
Add to wishlist

7 Segment 1 Digit LED Display 0.56inch(RED)

,

In stock

Original price was: ₹15.00.Current price is: ₹14.00. (inc. GST)
Add to cart
This Multitec 150b Wire Stripper and Cutter is a High-grade alloy steel stripper/cutter ideal for professionals. The tool is suitable for the flush cutting action. The tool is mainly used to strip and cut the wire with a 12-24 gauge. The black oxide finish prevents corrosion. Based on the wire size, screws have to be adjusted. Features : An improved handle for extra comfort and grip. Sharp cutting edge. Suitable for industrial applications. H-8mm L-13cm W-80 gm. Fast cutting action with black oxide finish. Strips and cuts wire 12-24 gauge. Wire Gauge screw in slot holds stripping die to the proper size for repeated jobs and prevent nipped wire. Sharp cutting edges for all industrial uses. Package Includes : 1 x Multitec 150b Wire Stripper and Cutter
Add to compare
Quick view
Add to wishlist

Multitec 150b Wire Stripper and Cutter

,

In stock

₹56.00 (inc. GST)
Add to cart
-11%
1000V/10A Test Probes for Digital Multimeter
Add to compare
Quick view
Add to wishlist

1000V/10A Multimeter Test Probe Leads

,

In stock

Original price was: ₹89.00.Current price is: ₹79.00. (inc. GST)
Add to cart
This mini electronic beeper support DC 3-24V power supply and produce continuous high-decibel alarm sound up to 85dB. 30mm diameter and 15mm thickness with 2-wire pigtails easy to connect widely used in the car modification,DIY electronics reminder projects or other area needs sound alarm. Application: DIY Projects Security Alarm System. Garage, Door safety Features: Wide Range of Operating Voltage Sound Output of 85dB
Add to compare
Quick view
Add to wishlist

Piezo Electronic Buzzer Beep Alarm Bell Continuous Sound 3v-12v Buzzer Electromagnetic

, , , ,

In stock

₹19.00 (inc. GST)
Add to cart