View cart “CJMCU-219 INA219 I2C Interface No Drift Bi-directional Current / Power Supply Monitoring Module” has been added to your cart.
-
DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink
- 3D Printer Parts, Motors and Drivers
- ₹199.00 (inc. GST)
- Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm.
- Add to cart
-
- Sale!
18650 Battery Holder/Development Board Compatible With Raspberry Pi3B/3B+
- Raspberry Boards and Accessories, Batteries and Accessories, Batteries BMS and Accessories
- Original price was: ₹299.00.₹259.00Current price is: ₹259.00. (inc. GST)
- Compatible With Raspberry Pi3B/3B+ Can Provide Output Current Up-to 6A I2C Battery Monitoring Built-in Battery Charger
- Add to cart
-
- Out of Stock
Multitec MT-02DX Self Adjusting Wire Cutter Stripper
- Tools and Accessories, Tools
- ₹289.00 (inc. GST)
- H-1 FEET L-1/2 FEET W-500 GM For all types of wires from 0.2mm to 6mm Self-adjustive and no damage to the inner core
- Read more
-
-
ATmega8A U PDIP-28 Microcontroller
- IC's and Base, Arduino Boards and Accessories, Development Boards
- ₹299.00 (inc. GST)
- Advanced RISC Architecture. Up to 16 MIPS Throughput at 16 MHz. On-chip 2-cycle Multiplier. Write/Erase Cycles: 10,000 Flash/100,000 EEPROM. Programming Lock for Software Security. Programmable Serial USART. Applications of ATmega8 Microcontroller: Useful for Multiple DIY projects.
- Add to cart
-
- Out of Stock
6S 20A Li-ion Lithium Battery 24V 18650 Charger Protection Board Module
- Batteries and Accessories, Batteries BMS and Accessories
- ₹299.00 (inc. GST)
- Charging voltage: 25.5V Charging current: 20A (MAX) Overcharge detection voltage: 4.28 ± 0.05V Overcharge protection delay: 0.1S Overcharge release voltage: 4.08 ± 0.05V Over discharge detection voltage: 2.55 ± 0.08V Overdischarge detection delay: 0.1S The overdischarge release voltage: 2.9 ± 0.1V
- Read more
-
-
- Out of Stock
Raspberry Pi Zero 2 W Development Board
- Development Boards, Raspberry Boards and Accessories
- ₹2399.00 (inc. GST)
- BCM2710A1 die Cortex-A53 CPU 512MB LPDDR2 DRAM 802.11b/g/n wireless LAN Bluetooth 4.2 / Bluetooth Low Energy (BLE) MicroSD card slot Mini HDMI and USB 2.0 OTG ports Micro USB power
- Read more
-
-
Hi Link HLK PM12 12V/3W Switch Power Supply Module
- Other Sensors, Voltage & Current Sensor, Voltage Regulator Modules
- ₹279.00 (inc. GST)
- Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test
- Add to cart
-
Hi Link HLK PM01 5V/3W Switch Power Supply Module
- Voltage Regulator Modules, Miscellaneous Module, Voltage & Current Sensor
- ₹249.00 (inc. GST)
- Meet UL, CE requirements, Ultra-thin, ultra-small All voltage input (AC: 90 ~ 264V) Low ripple and low noise Output overload and short circuit protection High efficiency, high power density The product is designed to meet the requirements of EMC and Safety Test
- Add to cart
-
DS3231 Real Time Clock Module 3.3V 5V Precise, with battery
- Sensor and Modules, Miscellaneous Module, Modules, Raspberry Boards and Accessories
- ₹239.00 (inc. GST)
- Supply voltage(V):+2.3 to +5.5 operating temperature range:-40°C to +85°C Supported Raspberry Pi and Arduino Provide battery backup for continuous timing. Two calendar alarm. 1Hz and 32.768kHz output.
- Add to cart
-
XBee Shield V03 Module Wireless Control
- Arduino Boards and Accessories, Modules, Sensor and Modules
- ₹209.00 (inc. GST)
- Stackable design, easy to plug into the ARDUINO development board. Coupled with the Arduino Bluetooth Bee Bluetooth module, and other Bluetooth devices can communicate Wirelessly. 3.3v and 5v dual power output. 3.3v and 5v IO compatible. USB2.0 protocol.
- Add to cart
-
Weighing Load Cell Sensor 5kg YZC-131 With Wires
- Sensor and Modules, Force & Pressure Sensor, Miscellaneous Module, Sensors
- ₹219.00 (inc. GST)
- Model: YZC-131A Dimensions: 75 x 13 x 13 mm (L x W x H) Range: 5 kg Cable Length: 18 cm Fitting ScrewHole Size: M3 Rated output: 1.0 0.1mV / V Nonlinear: 0.05% F.S Hysteresis: 0.0% F.S Repeatability: 0.05% F.S
- Add to cart
-
MAX6675 Module + K Type Thermocouple Sensor Measure 1024°C Temperature
- Sensors, Sensor and Modules, Temp, Humidity & Gas Sensor
- ₹349.00 (inc. GST)
- Temperature signal can be converted into 12-bit digital Embedded thermocouple break detection circuitry. High impedance differential inputs. Operating Voltage(VDC): 3 to 5.5 Temperature Range(°C): 0 to +1024 Cold Junction Compensation Range(°C): -20 to +80 Internal integrated cold junction compensation circuit; With a simple three serial SPI interface; Embedded thermocouple break detection circuitry. High impedance differential inputs.
- Add to cart
-
- Sale!
MPR121 Breakout V12 Capacitive Touch Sensor Controller Module I2C keyboard
- Modules, Miscellaneous Module
- Original price was: ₹199.00.₹99.00Current price is: ₹99.00. (inc. GST)
- Connection Interface: I2C. Operating Voltage: 2.5-3.6 VDC Application: Capacitive Touch Sensor Controller Number of touch inputs:12
- Add to cart
-
Standard Servo-TowerPro SG-5010(180 Rotation)
- Motors and Drivers, Robot/Drone Parts
- ₹279.00 (inc. GST)
- Model: SG5010 Weight: 39 gm Operating voltage: 4.8V~ 6V Servo Plug: JR Stall torque @4.8V : 5.5kg-cm Stall torque @6.6V : 6.5kg-cm
- Add to cart
-
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- 3D Printer Parts, Motors and Drivers
- ₹349.00 (inc. GST)
- Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
- Add to cart
-
HDMI To VGA Converter Adapter With Audio
- Connectors, Cable and Connectors, Tools and Accessories
- ₹299.00 (inc. GST)
- Transmit audio and video from HDMI to VGA monitors and projectors Continue to use older monitors with new devices Convenient adapter connects and converts signal Supports resolutions up to 1080 for PC and 1080p for HDTV 3.5mm audio jack sends audio to speakers or a display Simple plug-and-play connectivity
- Add to cart
-
CNC 3D Printer Mech Endstop Switch
- 3D Printer Parts, Cable and Connectors, Modules, Sensor and Modules, Sensors, Switches & Relays
- ₹89.00 (inc. GST)
- Wire type: 22AWG Working voltage: 300V Working Current: 2A Temperature resistance: 80° C Cable length: 70cm
- Add to cart
-
- Out of Stock
Data Logger module Logging Shield data Recorder Shield
- Arduino Boards and Accessories, Development Boards
- ₹229.00 (inc. GST)
- SD card interface works with FAT16 or FAT32 formatted cards. 3.3v level shifter circuitry prevents damage to your SD card. Real-time clock (RTC) keeps the time going even when the Arduino is unplugged. The battery backup lasts for years. Included libraries and example code for both SD and RTC mean you can get going quickly Prototyping area for soldering connectors,…
- Read more
-
-
- Out of Stock
75pcs. Gears Assorted Kit for DIY Robotics
- Tools and Accessories, Robot/Drone Parts, Robotic Kits, Robotics
- ₹199.00 (inc. GST)
- The Gear Package contains spindle, single/double crown gear, pulley, rack, bevel gear, copper gear, bushings, axles, tires, rubber bands and so on, more accessories that you need for diy toy cars/robots/motors.
- Read more
-
-
DS3231 RTC Module Precise Real Time Clock I2C AT24C32
- Batteries and Accessories, Batteries BMS and Accessories, Modules, Sensor and Modules
- ₹270.00 (inc. GST)
- Voltage Supply: 2.2V-5.5V Active Supply Current: 200-300µA DS3231 based RTC with 2032 Battery Holder. Highly Accurate RTC Real-Time Clock Counts Battery is NOT included.
- Add to cart
