DC12V 5010 Oil Containing Cooling Fan with XH2.54-2P 30CM Cable Size:40*40*10MM
- Motors and Drivers, Fan
- ₹55.00 (inc. GST)
- 50 x 50 x 10 mm casing Frame size 35 mm mounting hole spacing Cable Length 30 CM Ready to plug Connector for Pi board Colour: Black
- Add to cart
24V DC 12V 3A 21kHz PWM DC Motor Speed Controller Regulator Adjustable Speed Control Relay Module 6V-28V
- All Products, Motors and Drivers, Voltage Regulator Modules
- ₹269.00 (inc. GST)
- Input Supply Voltage: 12V-80VDC PWM Frequency: 21kHz; Duty Cycle adjustable: 0%-100% Suitable current range:current rating: 30A Potentiometer with switch function The display range of 3-digit LED display is "000"-"100". (For example, displayed "055", it means that the PWM output duty cycle is 55%.)
- Add to cart
- Out of Stock
MG995 Metal Gear Servo Motor (180° Rotation)
- Motors and Drivers
- ₹289.00 (inc. GST)
- Model: MG995 Weight: 55 gm Operating voltage: 4.8V~ 7.2V Servo Plug: JR Stall torque @4.8V : 10 kg-cm Stall torque @6.6V : 12 kg-cm
- Read more
IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
- Sensor and Modules, Modules, Motors and Drivers, Voltage Regulator Modules
- ₹65.00 (inc. GST)
- Voltage: 3.3 – 5V. Ports: Digital Level. Output load voltage: 0-24 V. Output load current: <5A (1A above need to add heat sink). Platform: Arduino, MCU, ARM, raspberry pi. Using original IRF520 Power MOS, you can adjust the output PWM Voltage: 3.3 – 5V. Ports: Digital Level. Output load voltage: 0-24 V. Output load current: <5A (1A above need to…
- Add to cart
5V 0.2A 3007 Cooling Fan for Raspberry Pi and 3D Printer
- Motors and Drivers
- ₹99.00 (inc. GST)
- Perfectly fit on the extruder Noiseless Performance Very low Current consumption Easy to install and connect.
- Add to cart
17HS4401S Stepper Motor Black Color Hybrid 4.2KGCM 1.5A with 1M Long Cable
- 3D Printer Parts, Motors and Drivers
- ₹699.00 (inc. GST)
- The 17HS4401S Stepper Motor is a Black Hybrid Stepper Motor with 4.2KGCM Torque and a Current of 1.5A with 1M Long Cable. This is best suited for 3D Printer ,Laser Engraver and other Projects
- Add to cart
- Sale!
TB6600 Stepper Motor Driver Controller 4A 9~42V TTL 16 Micro-Step CNC 1 Axis
- 3D Printer Parts, Motors and Drivers
- ₹549.00 (inc. GST)
- H bridge bipolar constant current drive. The biggest 4.0 A Eight kinds of output current are optional. The biggest 32 To subdivide 6 kinds of subdivision modes selectable. Input signal high-speed photoelectric isolation. A total of standard single pulse interface. Offline retention function. The semi-enclosed casing can adapt to a more stringent environment. Provide energy saving half automatic current lock…
- Add to cart
N20-3V-660 RPM Micro Metal Gear-box DC Motor
- Motors and Drivers, Motors
- ₹239.00 (inc. GST)
- This is a DC Mini Metal Gear Motor, ideal for making robots. Lightweight, high torque and low RPM. Fine craftsmanship, durable, not easy to wear. With excellent stall characteristics, can climb hills easily. You can also easily mount a wheel on the motor’s output shaft
- Add to cart
ULN2003 Driver Module Stepper Motor Driver Board
- Motors and Drivers
- ₹49.00 (inc. GST)
- ULN2003A motor driver chip Chip all the pins already leads for easy connection to use 5-12V power supply 4-way signal indicator Step angle: 5.625 x 1 / 64 Reduction ratio: 1 / 64 Phase: 4 Current / Phase: 5V
- Add to cart
TB6560 Stepper Motor Driver
- 3D Printer Parts, Motors and Drivers
- ₹589.00 (inc. GST)
- Working voltage:DC 10V-35V. Recommended to use a switching power supply DC24V Rated maximum output: ± 3A, peak 3.5A. Using the Toshiba TB6560AHQ new original chip with low voltage shutdown, overheating stop and over current protection circuit to ensure optimal performance For two-phase within 42,57 stepping 3A / four-phase / of line four / six-wire stepper motor, and is not suitable…
- Add to cart
- Sale!
1240 12V DC 0.6A 7.5W Solenoid for Electric Door Lock
- Motors and Drivers, Modules, Sensor and Modules, Tools, Tools and Accessories
- ₹349.00 (inc. GST)
- Holding force: 0.25kg Energized forms: intermittent Unlocking time: 1S Dimensions: 54 x 42 x 28 mm (LxWxH) High quality ultra-compact electric lock. Rustproof, durable, safe, convenient to use. Suction which tightly sucks the iron, thus locking the door. Applicable for being installed in the escape door or fire door electronic controlled system.
- Add to cart
100 RPM 12V DC Johnson Geared Motor Grade-A
- Motors, Motors and Drivers
- ₹429.00 (inc. GST)
- Operating Voltage: 6-18 V Rated Voltage: 12 V Rated Torque: 103 N-cm Stall Torque: 700 N-cm Gearbox Dimensions: 27×37 (LxW) mm Motor Type : High Torque Side Shaft Metal Gearedbox Motor. Rated Voltage : 12V DC. Rated RPM : 100 No Load Current : 800mA (Max.) Load Current : 7.5A (Max.) Shaft Diameter : 6mm (with M3 thread hole.)…
- Add to cart
DRV8825 3D printer Motor Driver Module with Aluminum Heat Sink
- 3D Printer Parts, Motors and Drivers
- ₹199.00 (inc. GST)
- Supply Voltage: 8.2 – 42 VDC. Current Capacity : 2.2A max(24V). Continuous current per phase: 1.5 A. Minimum Logic voltage: 2.5V. Maximum Logic Voltage: 5V. Microstep resolutions: full, 1/2, 1/4, 1/8, 1/16, and 1/32. Dimensions : 15 x 20 mm. Weight: 4 gm.
- Add to cart
Standard Servo-TowerPro SG-5010(180 Rotation)
- Motors and Drivers, Robot/Drone Parts
- ₹279.00 (inc. GST)
- Model: SG5010 Weight: 39 gm Operating voltage: 4.8V~ 6V Servo Plug: JR Stall torque @4.8V : 5.5kg-cm Stall torque @6.6V : 6.5kg-cm
- Add to cart
3D Printer Controller Board RAMPS 1.4 Arduino Mega Shield RepRap Prusa Model
- 3D Printer Parts, Motors and Drivers
- ₹349.00 (inc. GST)
- Supply Voltage: 12V Standard interfaces (as that of the extruder) Reserved GCI like I2C and RS232 3 MOSFET’s are applied to the heater/ fan and thermistor circuit. Another 5A added to protect the component parts. An 11A fuse is added to the hotbed. Support 5 stepper drive board
- Add to cart
Dc Motor 12v 100 Rpm High Torque Electric Micro Speed Geared Motor
- Motors, Motors and Drivers
- ₹149.00 (inc. GST)
- Voltage 12V Speed 100 RPM Torque High Motor Type Electric Gear Ratio Micro geared
- Add to cart